Request a Quote

  1. If you are interested in getting a quote for one of our Sculptedgrass just contact us. This can be for either supply only of Turf, or supply and lay.
  2. We will then contact you and arrange a site visit.
  3. After consultation, and measuring of the required area we will give you a quote.
  4. If you accept the quote then we come and do the job for you.
From start to finish, we are there with you. Easy as that.
captcha

The Installation Process

Estate

Estate

25mm pile short pile turf. $38 incl GST per m2 of grass only, the cost of laying is extra

The Estate, with its 25mm pile height, combines real lawn looks with affordability. The use of state-of-the-art UV protected yarn ensures great durability and comfort and makes it suitable for commercial and landscape applications. Using our fake turf and lawn grass in NZ not only creates the exquisite and glossy looks in the surrounding but also add the grandeur in your place also.

no-repeat;center top;;

10px

0px 10px 0px 0px

Product Features

  • Quality: Tufted cut pile Landscape/Commercial Turf
  • Pile Content: 100% Homo-Polymer, Polyethylene and U.V. Protected
  • Yarn Type 1: Multi ended, 11,333 Decitex Monofilament, Polyethylene Dual
  • Green/Green/Tan Txt PP
  • Primary Backing: 100% Woven Polypropylene, U.V. Protected, 141 gms
  • Secondary Backing: Maximum Water Resistant and Ultra Bonding Strength Latex
  • Pile Height: Pile Length: 25mm 57mm

no-repeat;center top;;

0px 10px 0px 0px

unangcol

  • Width: 3.71m
  • Colour: Multi Green/Tan
  • Infill Material: Washed and dried silica sand
  • Application rate: 6 – 8 kg / m2
  • Pile Gross Weight: 950 g/m2
  • Stitch Rate Per Metre: 140
  • No. Stitches/SQM: 14,700
  • No. Pile Per SQM: 29,400

no-repeat;center top;;

50px 0px 0px 0px

pro-fea-secondcol

Request a Quote

no-repeat;center top;;

20px 20px 20px 20px

req-quote

  1. If you are interested in getting a quote for one of our Sculptedgrass just contact us. This can be for either
    supply only of Turf, or supply and lay.
  2. We will then contact you and arrange a site visit.
  3. After consultation, and measuring of the required area we will give you a quote.
  4. If you accept the quote then we come and do the job for you.

From start to finish, we are there with you. Easy as that.

no-repeat;center top;;

20px 20px 20px 20px

req-quote

captcha

no-repeat;center top;;

20px 20px 20px 20px

req-quote

The Installation Process

center

no-repeat;center top;;

https://sculptedgrass.co.nz/wp-content/uploads/2017/07/Excavation.png

Step 1: Excavation

When we get to site we do a safety check for our staff. We then excavate. Generally the excavated material is removed from the site, unless otherwise agreed prior to the start of the job. At this stage we can get a good look at the soil to decide how much of a base we need to build up.

no-repeat;center top;;

https://sculptedgrass.co.nz/wp-content/uploads/2017/07/Preparation-3.png

Step 2: Preparation

The area has the base laid with compacted Gap20 at the bottom, and we use Gap7 or Pap5 compacted for the top. This gives a great surface ready for the Synthetic turf to be laid onto.

no-repeat;center top;;

https://sculptedgrass.co.nz/wp-content/uploads/2017/07/Step3a.png

Step 3: Lawn Laid

When the Turf has been laid, we pin down the edges. Where applicable, we attach it to a fixed edge like the timber in the photos.
Because the turf has been rolled up, we machine sweep the lawn to get the fibres all standing up vertically. The sand is then applied
with a final sweep to finish.

no-repeat;center top;;